CARTRIGE HOLDER
- Home
- CARTRIGE HOLDER
CARTRIGE HOLDER
PLASTIN cartridge holder are suitable for multiple applications, from mechanical filtration (mesh cartridges, wire wound, melt blown pp, etc …) to water treatment (polyphosphate salts, activated carbon, ion exchange resins, zeolites, etc.) ) Suitable for both domestic and professional use, non-toxic and suitable for drinking water, in compliance with the Ministerial Decree 174.
Made with high quality and resistant materials which, together with the continuous checks and the constant search for innovative processing technologies, guarantee the absolute quality of the entire product.

CARTRIGE HOLDER SD - SLIM
- Containers made up of 2 components: head and jar.
- Vent valve in reinforced polyamide (PA) and o-ring in EPDM
- IN / OUT threaded insert in brass with 1/2 “- 3/4” – 1 “passages and cylindrical BSP thread, or 1/4” plastic with conical NPT thread.
- Head in reinforced propylene (PP).
- Vertical crushing seal on the straw.
- Vase in transparent or opaque styrene acrylonitrile (SAN).
| Maximum operating pressure | 7 bar (101,5 psi) |
| Maximum operating temperature | 45°C (113° F) |
| Minimum operating temperature | 5° C (41° F) |
| Indicative empty flow rate | 100 l/min (a 3 bar) |

CARTRIGE HOLDER D - PROFESSIONAL
Containers made up of 3 components: head, metal ring and holder.
- Vent valve in reinforced polyamide (PA):
- IN / OUT threaded insert in brass with 1/2 “- 3/4” – 1 “- 1” 1/4 – 1 “1/2 passages and cylindrical BSP thread.
- Head in reinforced propylene (PP)
- Locking ring in reinforced propylene (PP)
- Vase in transparent or opaque styrene acrylonitrile (SAN).
Greater resistance to high operating pressures and easy opening for maintenance and replacement
| Maximum operating pressure | 8 bar (116 psi) |
| Maximum operating temperature | 45°C (113° F) |
| Minimum operating temperature | 5° C (41° F) |
| Indicative empty flow rate | 100 l/min (a 3 bar) |